Trio Padmavathi Blooms

1. Project at a glance

Project identity

Land and geographic identity

Development identity

Offering and status

2. The project story

TRIO PADMAVATHI BLOOMS is registered as a residential apartment project at Bachupally, on the portions of plots B-9 and B-10 identified in the RERA record. Its filed land extent is 445.69 sq. m. and the approvals describe one residential building of 1 Stilt + 5 upper floors. The RERA unit schedule identifies ten 3BHK apartments. The supplied material does not establish current physical construction progress or that any part is complete or occupied. The municipal permit requires the building to be completed in accordance with the technically approved plans and an occupancy certificate before occupation; no such certificate is included in the documents provided. RERA record RERA filing RERA unit table

3. Master plan, architecture & building design

The filed project site is 445.69 sq. m. The building approval describes a single residential building with 1 Stilt + 5 upper floors and a total built-up area of 1,446.10 sq. m. The extract also gives a separate PROP (BUILDING) figure of 1,193.15, without defining its area basis. These approval figures are kept distinct from the RERA-filed saleable area of the apartments. RERA filing RERA unit table

The approval material identifies transformer, garbage house, STP, rain-water-harvesting structures and fire-fighting installations as project provisions. It does not supply a drawing-derived account of the building footprint, flats per floor, lift or stair count, internal circulation, open-space dimensions, or residential/common-area breakdown.

4. Homes, configurations & floor plans

RERA supplies the unit count, booking figures and saleable area. The booked/available figures are from a portal snapshot without an as-of date. The carpet-area figures are software measurements from two floor-plan designs, not RERA disclosures, and the drawing measurements are marked as needing review. RERA unit table RERA unit details Floor plans

The measured plan for one flat shows three bedrooms, a living/kitchen area, two toilets, a wash area and a utility area. The utility is separately identified in the measurement record as excluded from carpet area. Saleable area and carpet area are different measures in the supplied records; the software-measured carpet figure should be checked against the approved drawing. RERA unit details Floor plans

5. Parking & vehicle circulation

The municipal permit identifies the stilt as exclusively for vehicle parking and says it should not be partitioned or converted. It also states that parking or construction is not to be placed in setback areas. The supplied records do not establish the sanctioned number of parking spaces, visitor or accessible spaces, a unit-wise parking allocation, or any EV-charging provision in the approval documents.

6. Amenities, recreation & open spaces

The RERA amenities record lists facilities and progress percentages; all listed percentage fields are 0. The approvals identify several building services and safety provisions. No independently verified completion status is supplied.

7. Utilities, building services & safety

The municipal permit lists water supply and drainage/sewerage disposal, a separate underground static water-storage tank of 25,000 lts., a separate terrace tank of 25,000 lts. for residential buildings, STP, rain-water-harvesting structures, a transformer, a garbage house and fire-fighting installations. These are approval-record provisions; the supplied evidence does not establish installation, operational capacity beyond the stated tank figures, or completed commissioning.

The HMDA technical approval also requires an STP, CCTV cameras and a minimum approach-road width of 4.5mts. as recorded in the extract. No lift count or capacity, backup-power specification, EV charging, accessibility details or independently verified fire-safety clearance is supplied in the project approval extracts.

8. Location, access & connectivity

The registered project location is Bachupally Village, Bachupally Mandal, Medchal-Malkajgiri District, PIN 500090. The site boundaries identify 40 Feet Wide Road on the east and, in part, on the south. The approval extract refers to an approach road and records a minimum width of 4.5mts.; the supplied record does not identify its route or provide public-transport details. RERA record RERA filing

A supplied location record gives HITEC City — 11.1 km from the cadastral parcel-centroid location. Location record Cadastral map

9. Developer & development status

The registered promoter is TRIO BUILDERS AND DEVELOPERS, identified in the RERA record as a partnership. Its GSTIN is 36AASFT1321P1ZN. The RERA certificate gives the promoter office location as Bachupally, Bachupally Mandal, Medchal-Malkajgiri District, PIN 500090. Corporate record

The registration file names SANTOSH REDDY POLICE and DIVYA SOMA as authorized signatories and identifies YACOB KANAPARTHI and VIJITH REDDY NALLA as partners. The promoter’s Form B declares a completion undertaking of 23rd January 2026. No current construction-progress measurement or completion certification is supplied. Parties record

10. Approvals, official records & documents

The HMDA approval extraction records mortgage-related conditions and a requirement for an occupancy certificate before occupation; the full approval conditions are not reproduced here.