Sudiksha Vivela

Project at a glance

Project identity

Land and geographic identity

Development identity

Offering and status

The project story

SUDIKSHA VIVELA is a registered residential apartment project on the site recorded at Rajampet, revenue village SANGAREDDY, in survey numbers 398/A and 399/A. Its building approval describes one proposed building with a stilt and five upper floors. The TG-RERA filing offers 20 two-bedroom apartments; it does not establish that any are booked as of a dated snapshot. RERA record RERA unit table

The approval and registration are current for the stated period, but neither is evidence that the building has been completed. The supplied records contain no verified construction-progress update or occupancy certificate. The approval requires a completion notice and occupancy certificate before occupation; the project’s stated completion deadline is 31 July, 2028.

Master plan, architecture & building design

The building-construction approval describes one proposed residential building with 1 stilt + 5 upper floors, a stated height of 14.99 m, and 1,694.55 m² of residential upper-floor area. It records a stilt area of 352.71 m² and site/net areas of 668.74 m² / 666.81 m², respectively. These approval figures should not be read as apartment carpet area or saleable area.

The approval lists a tot-lot, tree planting and a peripheral greenery strip among its conditions, and requires a transformer space, garbage house and rainwater-harvesting structure. The supplied material does not provide a reliable floor-by-floor apartment count, detailed lift or stair specifications, building footprint, internal circulation plan, or a quantified open-space layout. The filed layout-plan document is not extracted, so those design details are not established here.

Homes, configurations & floor plans

The unit count, booked/available figures and saleable area are from the TG-RERA configuration record; booking counts have no supplied as-of date. Carpet-area measurements were produced by software from the approved floor-plan drawing and are not RERA-filed measurements; the drawing-based results need review. Saleable area and carpet area are different measures: saleable area includes the home’s share of common areas, while the software-measured carpet area describes the measured internal area and excludes the shown utility. RERA unit table Floor plans RERA unit details

The measured sample includes eight 2BHK designs. One extracted fifth-floor plan identifies a master bedroom, a second bedroom, kitchen, living room, wash area, two toilets and a utility; the shown utility is excluded from the carpet measurement. These drawing-based room details should be checked against the plan itself. RERA unit details

Parking & vehicle circulation

The approval identifies a stilt for parking and states that any approved cellar/stilt parking must be used exclusively for vehicles. The supplied records do not establish the number of car or two-wheeler spaces, visitor or accessible spaces, parking allotments to individual apartments, or a parking-space-per-home ratio. A parking provision in the sanctioned building is not evidence of exclusive ownership of a particular bay. RERA unit table

No extracted plan information establishes ramp design, vehicle entry/exit arrangements, internal driveway dimensions, pedestrian separation or EV charging.

Amenities, recreation & open spaces

The TG-RERA amenity record also lists internal roads and footpaths, storm-water drains, street lighting, community buildings, sewage/sullage treatment and disposal, solid-waste management, energy management, fire-protection requirements and recreational open space. Their recorded progress is 0%; the supplied evidence does not provide dimensions or independent completion verification for them. RERA amenities

Utilities, building services & safety

The RERA amenity record marks water supply, sewerage and electrical meter-room/sub-station/receiving-station provision as “YES,” and marks water conservation/rainwater harvesting as “YES.” The building approval separately requires a rainwater-harvesting structure, transformer space and garbage house. The supplied records do not specify water source or storage, treatment capacity, an STP or reuse capacity, drainage design, power backup, lift count or capacity, or waste-segregation and security systems. RERA amenities

The approval makes the owner/builder responsible for structural and fire-safety requirements and requires sanitation, plumbing, fire-safety, lifts and electrical installations to be carried out under qualified technical supervision. It also contains conditions concerning safe distances from electrical lines and accessibility provisions for public and semi-public buildings above 300 m². These are approval conditions, not evidence that the relevant work has been completed or independently inspected.

Location, access & connectivity

The official project location is recorded as Rajampet, revenue village SANGAREDDY, SANGAREDDY mandal, Sangareddy district, PIN 502001. The supplied cadastral parcel-centroid coordinates are 17.59688, 78.06927. RERA record RERA filing Location record Cadastral map

The nearest sampled Outer Ring Road interchange is listed at approximately 21.5 km. No supplied evidence establishes a measured walking route, travel time, public-transport service, or other nearby landmark distances. Location record

Developer & development status

The registered promoter is SUDIKSHA INFRA, identified in the filing as a proprietorship. The project record names Kallem Subhash Reddy as proprietor/authorized signatory. The promoter address recorded in the project filing is Flat No 301, 3rd Floor, Chitrapuri Colony HIG 10th Block, RAJAMPET, SANGAREDDY, Sangareddy, 502001; the registration certificate separately prints a promoter-office address in Gachi Bowli, Serilingampally, Ranga Reddy district, PIN 500032. RERA filing Parties record RERA filing

The promoter is recorded as the development-agreement-cum-GPA holder for the project. The Form B declaration states that Masula Venkataramulu and C Aruna have legal title to the land and includes the promoter’s declarations concerning the separate account and annual account audit; its stated verification year is 2025, with day and month not printed in the extraction.

The project is registered through 31/07/2028 and the building approval gives a completion deadline of 31 July, 2028. No dated, independently verified construction-progress figure or occupancy certificate is supplied.

Approvals, official records & documents

The approval records a 10% mortgage area to be handed over through gift deed and states that the mortgaged built-up area may be registered only after an occupancy certificate is produced. Full approval conditions and the land/title implications are addressed in the relevant report sections.