Srinivasam County

1. Project at a glance

Project identity

Land and geographic identity

Development identity

Offering and status

2. The project story

SRINIVASAM COUNTY is a residential plotted layout in Alair, Alair Mandal, Yadadri Bhuvanagiri District. Its RERA record identifies the project land as survey numbers 100, 101, 103, 104 and 105, in the revenue-village identity recorded as ALER; the layout approval describes the site as Alair Revenue Village. RERA record RERA filing

The tentative layout approval provides for 95 plots and reserves land for plots, roads, a park/open space, utilities and social infrastructure. The approval also lists infrastructure and amenity works for the layout, including water facilities, sewerage-related works, storm-water drains, internal water-supply lines, street lighting, plantation and rainwater-harvesting pits. These are approval-recorded provisions, not evidence that the works are complete.

The supplied materials do not establish the current physical development stage, plot-by-plot availability, completed infrastructure, or an occupancy/completion certificate. The RERA registration certificate records validity through 01/11/2024, while the promoter’s Form-B declaration gives a different stated completion date; the dates are reported here as separate records, without treating either as proof of current site status.

3. Master plan, architecture & building design

The approval document is for a tentative residential layout, not a building plan describing apartments, floors or towers. Its area statement allocates the layout land as follows; figures and labels are reproduced from the approval extraction.

The software-read layout drawing identifies 95 plots and states that the sum of plot areas matches the drawing’s plotted-area statement. Plot areas range from 115.37 sq.m to 486.58 sq.m; the drawing-derived measurements and size bands are set out in section 4. The drawing measurement is not a substitute for checking the approved plan and the individual plot schedule. Layout record

The RERA fields state an approved built-up area of 8441.54 sq.m, but the supplied layout records do not explain its component, and no building count, footprint, floor configuration, parking levels, or building circulation details are provided. RERA filing

4. Homes, configurations & floor plans

This is a plotted development, so the RERA-filed offering is plots rather than apartment configurations. The supplied record identifies 95 plots in the approved drawing-derived schedule; it does not provide booked or available counts or plot-wise RERA saleable areas. Document index

The smallest and largest software-read plot areas are 115.37 sq.m (138.0 sq.yd) and 486.58 sq.m (581.9 sq.yd) respectively; the median is 125.42 sq.m (150.0 sq.yd). The most common printed plot size is 125.42 sq.m (49 plots). These are drawing-derived measurements, not RERA-filed carpet or saleable-area figures. Layout record

No apartment floor plans or apartment-area measurements are applicable on the supplied evidence: the two available drawing sheets are identified as layout sheets, with no flats. Floor plans

5. Parking & vehicle circulation

The layout approval allocates 31.73% of its stated area to roads and requires roads to be opened for access to neighbouring sites. It also states that no compound wall or fencing may be constructed around the site. These are approval conditions; the supplied evidence does not independently verify road construction, access arrangements on the ground, or pedestrian separation.

No parking-space count, visitor or accessible parking provision, vehicle-allocation terms, or plot-specific parking arrangement is established in the supplied records. The layout approval states that only a detached dwelling house for a single family may be built on a site, but it does not specify parking provision for those future houses.

6. Amenities, recreation & open spaces

The approval document lists layout works and reserves land for open space, utilities and social infrastructure. The supplied RERA amenity entries mark some categories as available but show 0% progress; they are not evidence of completion. RERA amenities

7. Utilities, building services & safety

The tentative layout approval lists utility and infrastructure works. These are recorded requirements or proposed layout provisions; the supplied material does not establish completed works, operating capacity, or statutory compliance.

8. Location, access & connectivity

The registered project location is Alair, in Alair Mandal, Yadadri Bhuvanagiri District, Telangana, PIN 508101. The supplied location record places the project in Alair mandal; its geocode is 17.6467579, 79.0738512. RERA record Location record

The tentative layout approval describes the site as Alair Revenue Village and records the project survey numbers as 100, 101, 103, 104 and 105. It requires layout roads to be opened for access to neighbouring sites. The only supplied measured connectivity point is the nearest sampled Outer Ring Road interchange at approximately 47.1 km. No other approach-road, public-transport or landmark distances are provided. Location record

9. Developer & development status

The registered promoter is Sri Srinivasa Infra Developers And Others. The RERA record describes the organization type as “Others,” with the further description “Partnership.” The GSTIN is 36AEQFS9974K1ZT. RERA record RERA filing Corporate record

The registration certificate lists the promoter office as Village: Balapur, Mandal: Balapur, District: Ranga Reddy, Pin: 500079. The supplied record does not provide official contact details or an official website.

The promoter’s Form-B declaration, made by authorized signatory Sunki Raghavendra, is dated 14th November, 2022. It records a completion undertaking of 1st November, 2022 and declares the land free from encumbrances. These are promoter declarations; they do not establish present construction progress or completion.

10. Approvals, official records & documents

The approval is expressly described as tentative. It states that the layout applicant is responsible for carrying out infrastructure and amenity works, and that final layout release depends on development works and release of the mortgaged land. The approval also records that open-space, utility and road areas are to be handed over to the Municipality by registered gift deed before final layout release. These are approval-document terms; this overview does not establish whether the conditions have since been fulfilled.