AISHWARYA PRIDE KVR s

1. Project at a glance

Project identity

Land and geographic identity

Development identity

Offering and status

2. The project story

AISHWARYA PRIDE KVR s is a plotted-layout project registered in the name of SIRI MAHALAXMI INFRA DEVELOPERS, covering land identified in Vinjamoor village, Chinthapally mandal, Nalgonda district. The six survey numbers in the registration record are 832/2/22, 832/2/5, 832/2/6, 832/2/7, 833/2/4 and 832/2/2. RERA record

The HMDA-filed material describes a draft open-plot layout, with a drawing schedule showing 85 plots. Its area statement allocates land to plots, roads, open space, social infrastructure, utilities and a green belt. These are layout-plan areas, not measurements of completed works. The record supplied here does not establish on-site completion or independently verified progress. RERA amenities

3. Master plan, architecture & building design

This is a plotted development rather than an apartment or multi-storey building project. The filed drawing states a total layout area of 21,346.26 sq.m and net layout area of 19,873.24 sq.m. The drawing’s land-use schedule allocates the net area as follows; figures and percentages are reproduced from that schedule.

The layout drawing’s plot schedule indicates 85 plots. Software-read drawing data gives plot sizes from 125.42 sq.m to 348.6 sq.m; the most frequently shown sizes include 125.42 sq.m (20 plots), 135.57 sq.m (13), 125.43 sq.m (13) and 133.78 sq.m (9). These are drawing-derived readings, not a RERA-filed unit inventory. Layout record

The drawing identifies internal roads and road widths, and the draft layout conditions require road formation, drainage, utility ducting, footpaths and related layout works. No buildings, floors, building footprints or apartment layouts are evidenced for this plotted project.

4. Homes, configurations & floor plans

The offering is plots, not apartments. The supplied RERA data does not provide a plot-wise booked/available inventory or RERA-filed plot-size schedule. The layout drawing’s plot schedule is software-read and should be checked against the source drawing. RERA unit table Layout record

Software-read plot-size range: 125.42–348.6 sq.m (smallest to largest). The supplied floor-plan analysis records two layout sheets and no flats; it contains no carpet-area measurements. Layout record Floor plans

5. Parking & vehicle circulation

The layout drawing records 0.00 sq.m for common parking area. The supplied project data does not establish a sanctioned parking-space count, visitor or accessible parking, plot-specific parking allocation, or EV charging provision. A drawn or earmarked area would not by itself establish exclusive parking rights. Document index

Internal roads are included in the layout land-use schedule; the draft layout conditions also call for roads and pedestrian footpaths. No vehicle-entry arrangement, turning geometry, driveway details or parking-allotment terms are established in the supplied records.

6. Amenities, recreation & open spaces

The filed draft layout and its conditions identify planned open-space and community-related provisions. The amenity data reports 0% progress for listed items, so these should be read as recorded provisions or requirements, not as completed facilities. RERA amenities

The promoter brochure lists additional features, but its project-specific identity is not confirmed in the supplied evidence; those claims are therefore not presented here as established project facilities. Promoter website

7. Utilities, building services & safety

The HMDA draft-layout conditions describe the following proposed layout infrastructure: internal water-supply pipelines, overhead tank, an assured water-supply source, underground drainage and a common septic tank/STP; storm-water drains and nala channelisation; rainwater-harvesting pits; electricity lines, transformer and street lighting; utility ducting; and a solid-waste disposal area with source segregation and a bio-compost unit. These are stated development requirements, not evidence that the systems have been installed or commissioned.

The conditions also refer to paved footpaths and pedestrian space, and require underground storm-water drainage and street lighting. The supplied records do not state water-storage capacity, STP capacity, electrical load, backup arrangements, security systems, fire-service installations or accessibility specifications for this plotted layout. RERA amenities

8. Location, access & connectivity

The registered project location is Vinjamoor, Chinthapally, Nalgonda, Telangana 508373. The filed layout identifies Vinjamoor village and Vinjamoor Gate locality; the plan’s boundary schedule refers to a proposed road and an existing 33-wide road on the east side. RERA filing

The supplied location data gives a cadastral parcel centroid of 16.83827, 78.80340 and an approximate sampled distance of 52.2 km to the nearest sampled Outer Ring Road interchange. This is a mapped distance, not a travel-time estimate. Location record

9. Developer & development status

The TG-RERA-registered promoter is SIRI MAHALAXMI INFRA DEVELOPERS, identified as a partnership. The supplied corporate identifier is GSTIN 36AFAFS1295N1ZJ. The promoter record lists KALLAM VENKATESWAR REDDY as authorized signatory and KALLAM RAJESWARI as partner. Corporate record Parties record

The Form B affidavit is signed by KALLAM VENKATESWAR REDDY as authorized signatory and includes the promoter’s declaration of a completion date of 04/01/2029. The project-information record separately lists 04/05/2029 as the proposed completion date; no construction-progress verification is supplied here. RERA filing

The registration certificate identifies the promoter address as Village Nagole, Uppal mandal, Medchal-Malkajgiri district, PIN 500068. The supplied promoter record also lists the project-office address as B, Lalitha Nagar, Vinjamoor Gate, Chinthapally, Nalgonda, 508373. Corporate record

10. Approvals, official records & documents

No building-specific commencement certificate, completion certificate or occupancy certificate is identified in the supplied project records.